接洽咱們
DY501型
發熱器熔融極品裝備
可4個樣同時熔融，積極地扭捏，積極地吃妻上癮；
成形模具加工會去主動進行加熱，自主冷卻后，自主澆注；
大屏幕中文顯現，過流過溫主動報警堵截；
可自由添加提溫發展，預存很多個提溫西式。
間介
XX射線熒光闡發對粉化樣本，今時包容相互壓片法治建設備試板極其席卷，但鑒于粒級分析、粘土礦產、偏析等效果的損害，已然帶給闡發誤差率，減少種化學元素闡發的精硬度與準確度，樣本制法不諫為同一個首先是的誤差率身分。窗戶玻璃熔融法治建設成的試板能消弭試板的粒級分析、粘土礦產、偏析等效果，時也可減少樣本種化學元素間的收發和強化效果，會較著取得進步闡發的表面粗糙度和準確度。對ICP、AA和濕法有機化學闡發方法，對難溶備樣，熔融形式那樣不是種很是進一步優化的制樣方法。
余年來香港國際所接受的熔融配置均依托通道口，價格多少很是端莊，而對類似于情況下排場，本工廠科研工作保安員于2002年開拓變現了挽救國家空崗的DY501型電暖熔融法寶。它融合了現在國際級領域上同樣的制樣技能的特長，其首先要性能停靠甚至跨躍外洋同樣的代謝物。而是其優秀企業的性能和秉公的價格，定將帶換進氣口代謝物，并使難道而是區域經濟原因暫不用熔融技能的我們怎么樣才能使用它。DY501型發熱器熔融史詩裝備的面市，定將攻速突飛猛進發展熔融制樣法，而突飛猛進發展發達國家闡發界制樣的方面，為各大銀行各業分享浩大的條件效益分析。
Brief Intoduction
Currently, powdered samples for X-ray fluorescence analysis are usually directly pressed into sample pieces. But that kind of sampling has become a major error factor impacting the precision and accuracy of the element analysis due to the granularity effect, mineral effect and segregation effect of the sample pieces. The bead fusion method can eliminate the granularity, mineral and segregation effects of the samples, and can reduce the absorption and enhancement effects between the elements in the sample, and hence evidently increase the precision and accuracy of the analysis. This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.
For many years, the fusion machine used in China were all imported from abroad at very high price. To fill up that gap in Chinese science and technology, the research and development personnel in our company developed the DY501 Electroheat Fusion Machine in the year 2002. This fusion machine absorbed the advantages of all the fusion machine of the same kind in the international markets, with key properties up to or even better than those of the overseas products. With its excellent performance and reasonable price, it will take the place of the imported products and can be affordable for the users which are currently not using fusion units just because of economic reasons. The popularization of the DY501 Electroheat Fusion Machine will rapidly promote the bead fusion method in China and hence improve the sampling quality of the element analysis, which can bring tremendous economic benefit for every industry or trade.
一技之長運作
預熱基層單位：3根雙回旋單端硅碳棒；
最多溫濕度：1250℃，不斷可手動調節；
紅外測溫計量單位：2根鉑銠熱電阻，最高的人溫度測量1600℃；
電容量：而且熔融4個樣品管理（可，并按照移動用戶懇請添加到6個）；
工作功率：6kw;
電源模塊：380-415V,50-60Hz，三相四線;
尺寸圖（高×寬×深）：500mm×1217mm×500mm;
使用：115kg.
Technical Specifications
Heating unit: 3 pieces of double helix ,single-end, silicon carbide rod
Maximum Temperature: 1250℃,continuously adjustable
Temperature measurement unit: 2 pieces of platinum-rhodium thermocouple, with maximum measurable temperature 1600℃
Capacity: 4 samples simultaneously (maximum 6 samples if required by user)
Wattage: 6kw
Power supply: 380-415V,50-60Hz，three phase
Dimension(Height ×Width × Depth): 500mm×1217mm×500mm
Weight: 115kg
首先優點
◆接收CPU微機及PID規范匠人，大顯示顯示屏常常顯著,萊單式使用；
◆雙錐形硅碳棒受熱，鉑銠鉑熱電阻測溫度；
◆最久可一同熔融4個合格品（可通過大家標準展現出到6個）；
◆可之后自得控制比較多達10個供暖制樣西式，其供暖過程中，變多效率，愛到最后工作溫度，坩堝架扭捏的那時候、頻率、效率，急冷的那時候，就是是使用電扇，新風量具體等都可以這件事以后調節；
◆除熔融樣傳遞制作壓鑄模敞開心扉自動外，任何均主動地吃妻上癮，保障機制了印刷品的意見分歧性和均勻性，實際能做到不一印刷品僅是其有效成分有什么區別而不任何有什么區別；
◆坩堝及做成型塑膠模具的三角架認同耐較低溫度合金類鋼成,保駕護航在溫度低管理狀況下無什么有機化學體現；
◆熔樣室蓋翻閱裝配接收鏈條鏈輪杠桿比例戰略布局，控制輕松自由自若；
◆具備最低的運行溫度表警告，打開熔樣室沒電保護；
◆具備過流、過溫跳電保護并告警，同時過溫跳電保護寬容與調溫制樣自力的熱電阻紅外測溫，與調溫控制線路一路路帶來雙重保護，使過溫跳電保護更靠得下。
Features
◆Applies CPU microprocessor and PID control technique, large screen Chinese display, and menu operation
◆Heating with double helix silicon carbide rod; temperature measured with platinum-rhodium thermocouple
◆Up to 4 samples can be fused simultaneously (maximum 6 samples if required by user)
◆Up to 10 customized heating programs can be preset; within the programs, the heating process, the temperature increase speed, the final temperature, the shaking time, shaking amplitude, and shaking speed of the crucible stool, the cooling time, whether to use fans, the air flow, and so on, all can be preset.
◆Automatic control in all the process except for the filling of the fusion sample, enabling the sameness and homogeneity of the sample; all samples are uniformly the same except for the differences in composition
◆The bracket of the crucible and the mould are made of high temperature alloy, which guarantees no chemical reaction in high temperature
◆Chain wheel lever structure is used in the opening device of the cover of the fusion room, trouble-free for user operation
◆With minimum start temperature alarm and power switch-off protection when the cover of the fusion room is open
◆Automatically switching off power and setting alarm for overcurrent and overheat; independent temperature measurement thermocouples are used for overheat protection and heating control; together with the heating control circuit, they can form treble protection of the system and can make the power switch-off protection for overheat more reliable.